Zuber, Ralf and Stührmann, Ansgar and Gugg-Helminger, Anton and Seckmeyer, Gunther (2017) Technology for detecting spectral radiance by a snapshot multi-imaging spectroradiometer. Measurement Science and Technology, 28 (12). p. 125903. ISSN 0957-0233
Zuber_2017_Meas._Sci._Technol._28_125903.pdf - Published Version
Download (2MB)
Abstract
Technologies to determine spectral sky radiance distributions have evolved in recent years and have enabled new applications in remote sensing, for sky radiance measurements, in biological/diagnostic applications and luminance measurements. Most classical spectral imaging radiance technologies are based on mechanical and/or spectral scans. However, these methods require scanning time in which the spectral radiance distribution might change. To overcome this limitation, different so-called snapshot spectral imaging technologies have been developed that enable spectral and spatial non-scanning measurements. We present a new setup based on a facet mirror that is already used in imaging slicing spectrometers. By duplicating the input image instead of slicing it and using a specially designed entrance slit, we are able to select nearly 200 (14 × 14) channels within the field of view (FOV) for detecting spectral radiance in different directions. In addition, a megapixel image of the FOV is captured by an additional RGB camera. This image can be mapped onto the snapshot spectral image. In this paper, the mechanical setup, technical design considerations and first measurement results of a prototype are presented. For a proof of concept, the device is radiometrically calibrated and a 10 mm × 10 mm test pattern measured within a spectral range of 380 nm–800 nm with an optical bandwidth of 10 nm (full width at half maximum or FWHM). To show its potential in the UV spectral region, zenith sky radiance measurements in the UV of a clear sky were performed. Hence, the prototype was equipped with an entrance optic with a FOV of 0.5° and modified to obtain a radiometrically calibrated spectral range of 280 nm–470 nm with a FWHM of 3 nm. The measurement results have been compared to modeled data processed by UVSPEC, which showed deviations of less than 30%. This is far from being ideal, but an acceptable result with respect to available state-of-the-art intercomparisons.
Item Type: | Article |
---|---|
Subjects: | STM Open Library > Computer Science |
Depositing User: | Unnamed user with email support@stmopenlibrary.com |
Date Deposited: | 14 Jul 2023 11:06 |
Last Modified: | 08 Jun 2024 07:59 |
URI: | http://ebooks.netkumar1.in/id/eprint/1904 |